- Hits: 25009
Woodworking routers are one of the most popular tools because of their unique versatility. Although using a router free-hand is useful for rounding over corner edges or even cutting dados, the real value of a router is when it is in a router table. Someone told me many years ago that 90 percent of things you can do with a router - require a router table. That comment has stuck with me for many years and I still agree with it.
The new Freud Router Table is not much different than their original version of a few years ago, with the biggest change being in the capabilities of the fence. In the older "Ultimate Router Table" in order to remove the router from the router table it was necessary to completely remove the 2 large hold-down/fence-adjustment bolts. Even more annoying was the fact that if you were making raised panel doors for example, after you made the rails and styles and wanted to move on with the the actual raised panel portion of the door, again you had to completely remove the 2 hold-down/fence-adjustment bolts. Now this isn't huge deal, but if you made a lot of raised panel doors like I do, this was very annoying to have to re-set up the fence each time.
The new Deluxe Router Table solves this problem by having not 2 but 4 hold-down/fence-adjustment bolts, and they, along with the whole new fence design, are all on slides now. This means the whole fence can slide back and forth the full distance of it's adjustment without having to remove any of the hold-down/fence-adjustment bolts. This also means that if you want to take the router out of the table, again, you can simply slide the whole fence back far enough with all the hold-down/fence-adjustment bolts in place, and still remove the router and base plate.
The other nice feature of the new router table is the micro fence adjustments on BOTH the left and the right have been re-instated .. and more, click Read More for more information on the Deluxe Freud Router Table