Strength Testing Salt and Grit on Glue Joints
- Read Time: 3 mins
- Hits: 12314
For many years I have heard people using things like Salt and Sand as a medium between 2 boards being glued, to help eliminate the slippage that happens when we try to glue boards together. I have never used the technique but recently I have had a flurry of people asking me if the using Salt as a grit when gluing boards together, does that weaken the joint?
Strength Testing Salt and Grit on Glue Joints
It sounds plausible that it might, but it could also strength the joint ... or it might do nothing noticeable, but I will never know if I don't test it, so that's exactly what I set out to do ...
Installing Steel Legs on Live Edge Maple Coffee Table
- Read Time: 6 mins
- Hits: 10656
Some time ago I joined some cuts from a live edge slab of wood to make a somewhat square, live edge coffee table top, then I finished the top with a special version of teak oil called Teak-Olje and both those articles and videos can be found here: Part 1 & Part 2.
This final video and article are a quick overview of installing some Steel Legs to the coffee table and something I have not worked with in the past, so a whole new experience for me.
Installing Steel Legs on Live Edge Maple Coffee Table
I started off by purchasing ready made steel legs from one of the big box hardware stores rather than trying to make my own. There was not many choices of steel legs that I could purchase locally, but did find some inverted "V" shaped legs that I liked and that looked very well made ...
Quick Workshop Hacks Part 5: Woodworking Tips and Tricks
- Read Time: 2 mins
- Hits: 12516
Sometimes it's a good thing that I never seem to throw anything away, other times ... well. But for now, salvaging an old plastic spring clamp that didn't work as a clamp anymore and re-purpose it to make it into a hose clamp for my dust collection system that works like a speed clamp now and makes moving 4-inch hoses from one machine to another a quick and easy task.
Quick Workshop Hacks Part 5: Woodworking Tips and Tricks
I did take a small bit of ingenuity to take specialty dust collection hose clamp and adapt it to a spring clamp ... a broken spring clamp, but the finished product works like a charm ...
Table Saw Jointer Jig / Router Jointer Jig: How to Joint Wood Without a Jointer
- Read Time: 3 mins
- Hits: 30436
Jointing wood edges are probably one of the most common tasks we do in woodworking and one of the reasons that jointers are such a common tool, but there are other ways fo jointing wood. Two of the methods I still use from time to time are using the table saw with a special sled, and using my wood router.
Table Saw Jointer Jig / Router Jointer Jig: How to Joint Wood Without a Jointer
Both of the methods shown here can give excellent results and provide perfectly straight and even joints ...
Make a Edge Jointing Sled Jig / Edge Jointer Safety Push Block
- Read Time: 4 mins
- Hits: 10722
One of the frustrating things when working with wood that is warped is trying to get at least one edge flat and straight without taking off too much wood, and of course, doing it all safely. Many years ago I made a kind of long push block for the jointer, but it never really worked as I had hoped so I abandoned it ... now years later I am remaking a newer version with some upgraded features.
Make a Edge Jointing Sled Jig / Edge Jointer Safety Push Block
The purpose of the block is to be able to safely handle smaller pieces of wood that are warped, and run them through the jointer until I can get an edge to them that is stable enough to use my hand paddles to continue to work the wood as needed.
AntiSkid / Anti Slip Workshop Life Hacks - Woodworking Tips and Tricks
- Read Time: 5 mins
- Hits: 12853
Anti Skid and Anti Slip materials have been around for many many years now and in some areas, they are finding new uses and certainly in my workshop they are. I love this material, it comes in different "weights" or thicknesses, it's quite inexpensive and it works great. I seem to find a new use for it on a regular basis and it never disappoints me.
AntiSkid / Anti Slip Workshop Life Hacks - Woodworking Tips and Tricks
I was first introduced to this material in the form of "router Mats" that were said, at the time, to be anti-slip so that you could freehand route anything and when you used this anti-slip material between your wood and your workbench, the material would hold it firmly while you routed. And it was true, this stuff worked great. Then I found that you could purchase similar materials in different thicknesses and apply it to many different things to make them much less susceptible to movement.
Page 51 of 105