Bandsaw Setup and Tuning
- Read Time: 6 mins
- Hits: 29226
But band saws have one inherent problem, and that problem is that most of them will tend to "drift" when they are cutting through wood. What this means is that if you are ripping a piece of wood, and following a marked line, there is a very good chance your band saw will develop a mind of it's own and start cutting off that line. This drift is caused by a variety of elements like the grain of the wood, they type band saw blade you are using (and how sharp it is), the tension on the blade and even whether or not the blade is running true on the 2 band saw wheels. It is often possible to reduce drift but in most cases you have to learn which way your band saw will drift and take that into account when you are cutting wood.
Another inherent feature of all band saws, particularly when they are ripping wood, is that at the beginning of the cut the saw will cut quickly but as it is cutting through the wood the speed at which the wood is cut is noticeably slowed. Again this is typical of almost every band saw, small or large, so if you find this happening with your saw ... it is not "your saw" it is all saws that have this quirk.
Setting up a band saw is an important step in order to get the best cuts and help preserve the life of your blades and your saw. It is important that power to the saw be turned off before any setup is attempted. The first step is to set the BLADE TENSION, which, on most 2 wheel band saws is done by RAISING the top wheel with the appropriate adjustment knob or wheel on your band saw ....
Milwaukee M12 Cordless System Review
- Read Time: 3 mins
- Hits: 16793
Milwaukee Tools have been around for quite some time ... actually ... well over 100 years. Several years ago they were purchased by Techtronic Industries (TTI), who also own Ryobi, AEG, Homelite and others. The Milwaukee brand in the complex of businesses is considered to be the serious tool owners preference because of the high quality of Milwaukee tools.
If you get a chance to look at their website ... if the quality of their tools is anything like the high quality of their website you will be in for a treat of having a well made tool. Not only do they describe all their tools on the website (the same as everyone else) they ALSO provide excellent information on parts ... too bad others don't take this hint.
We tested some of the components of the M12 System which is their 12 volt cordless system, which consists of a drill, a driver, recip saw, rotary tool, inspection and camera viewers, lights, temperature measuring guns, a palm nailer, PVC shearing tool, a multi tool, and even a very cool radio/MP3 Player (that can withstand the rigors of a construction site).
The tools we looked at primarily were the drill and driver as we felt these would be among the most popular tools in the lineup. The 12 volt system is NOT for everyone. The power is ... well, 12 volts, which is great for driving smaller nuts and bolts and screws, or for drilling a smaller number of holes. The 12 volt system is not going to drill multiple holes though 2" fir beams if you happen to be running new power feeds from your 110 electrical panel. The 12 volt system is perfectly suited for smaller applications of drilling multiple smaller holes, or driving screws into a woodworking project. What we liked was that the 12 volt system is light but still packs enough punch to drive larger screws into Oak without any difficulty.
What was of particular interest is that these new tools are all using the same lithium ion battery system which recharges in something like 30 minutes.
Building A Business Around Your CNC Machine
- Read Time: 6 mins
- Hits: 108711
In an ideal world we would all get to use our own woodworking tools and make lovely furniture and sell it for a nice profit and make a living. Sadly, reality says - this isn't going to happen for most of us - SO what are the alternatives.
One industry that I have always felt there was extra work in, and a good part-time business as well, is the CNC woodworking business. For those of you who need a quick refresher, a CNC machine is nothing more than a computer controlled router. On a computer you create some sort of a graphic, like lettering for a sign for example, send that information to the router through the computer and in a while the router carves out the exact same drawing you input into the computer.
There are a number of different types of CNC machines and they have different capabilities and sizes of wood that they can accommodate, so there can be some restrictions. For example, all CNC routers will go back and forth and up and down, but some have even more control, and could for example turn the bit to 90 degrees or more to actually make three dimensional items. But all that is detail, for now we want to look at the business of creating a CNC router business.
Making a Sandpaper Storage Cabinet
- Read Time: 5 mins
- Hits: 17368
Sanding is one of the necessary but often most hated parts of woodworking. I have seen many different woodworkers go to great lengths to try to avoid sanding and sandpaper ... and I'm one of them. I know how important sanding is because I can see and feel the results on my projects, I just HATE sanding ... the noise ... the dust ... the repeated sandings and most of all the trying to sort out my pile of sandpaper grits, all contribute to this dreaded job.
I don't have any fancy sanding machines so all my sanding is done by hand and almost always outside so I can keep the dust away from my lungs and the rest of the shop.
Today I have decided to at make a new effort at trying to organize my sanding sheets, sanding discs and my sharpening sheets. I store these in all different locations then have trouble finding them so end up leaving them all piled on a small shelf in front of what is my slot shelves for sand paper. It's just not working.
Setting Jointer Knives
- Read Time: 4 mins
- Hits: 22975
Setting jointer knives appears to be universally every woodworkers worst duty. When I talk to woodworkers, the one thing they hate doing most is setting jointer knives (although many also hated setting planer knives, but that`s another article).
One of the biggest problems is many did not know what height the knives should be set at. Many woodworkers believed that jointer knives should be set at the exact height of the outfeed table. Which in theory would be correct but in practice is not the best idea. I even had some woodworkers who adamantly believed the jointer knives should be even with the infeed table. This is the WORST thing you can do if you EVER want to get straight, flat boards.
Setting Jointer Knives
If you set jointer knives BELOW THE LEVEL OF THE OUTFEED TABLE, the boards you run through your planer will be bowed like the lower runners of a rocking chair. The more you run them through the jointer the more bowed they will get ... to the point, the only way to correct the bowing is to mark a straight line down the length of the board and run the board through a table saw - freehand. THEN adjust your jointer knives correctly and start all over again runing the board through the jointer.
Restoring Antique Rocking Chair
- Read Time: 7 mins
- Hits: 38769
Restoring antique furniture is not for the faint of heart !!!
If you are an avid watcher of the television show The Antiques Road Show or other similar shows, you will know that it is a BIG no, no to do any work, as in re-finishing, re-building or re-storing to old antiques. Apparently collectors would rather have antiques that are in what ever shape they are, good or bad and they do not want anyone to alter the original object. In the event an item is re-finished or re-built the value plummets like lead balloon ... and I can understand that. What I don't understand is when I see very nice old furniture that is in terrible shape, that no one will do anything with because it "might" de-value the piece of furniture. In many cases some lovely old furniture has come un-glued, pieces missing or just simply badly abused over the millenia and now it needs some work to put it back together and maybe even a re-finish job to make the piece as close to it's original shape as possible.
Restoring Antique Rocking Chair
The truth is, there are hundreds of furniture restores all over the world who fix, repair and re-finish old and antique furniture every day. I believe these restores do a service by preserving these valuables by making them able to withstand the next 100 years. The question I had, was what to do with an antique rocking chair that I was commissioned to restore.
Page 100 of 104