Shop Made Disc Sander / Bench Top DIY Build
- Read Time: 6 mins
- Hits: 24192
When I spotted the 2 electric motors at the garage sale, I passed over them at first. They were covered in dust, paint splatters and cobwebs and I doubted either worked. After a few minutes with no other finds, I was about to leave and asked the lady if the motors worked ... she did not know. I asked if I could plug them in, explaining that they might trip the electrical circuit, whereupon she said no, take them "as is" and gave me a lower price ... I told her that her price was too low, gave her more money and left with the 2 unknown condition motors ... neither of which I expected to work.
Watch it on Youtube: https://youtu.be/_yhYgfuoNGM
When I got them home and plugged them in, to my delight, they both worked. I was amazed. They were both only one-third horsepower, which I thought would be a bit low for making a disc sander, but if I made the disc size smaller, it might work ... so I went ahead with the plan.
Subscriber Submitted Woodworking Tips and Tricks - Episode 8
- Read Time: 6 mins
- Hits: 6454
I love how different all of the submissions are that I receive from subscribers. Some are more along the DIY line while others are all woodworking related, and since most of us often do some of both ... they are all valued at one point or another.
Watch it on Youtube: https://youtu.be/NxNV_FbFj6k
The first entry today is from Karin, and I must admit I had heard of one of these tips, but never got around to trying it until Karin sent me the email ...
Colin Knecht's Easy End Table Build / Side Table DIY
- Read Time: 5 mins
- Hits: 11714
The one thing I like most about woodworking is that if you need some sort of a special piece of furniture, with a little bit of wood and a few hours of time you can build something that not only looks and works great but soon becomes a family heirloom ...
Watch it on Youtube: https://youtu.be/huv_yOtp3gQ
This little table can easily be built in a day ... but you might need another day or 2 to apply the finish, depending on what you use, and it's sturdy and just the right size for a living room end table.
Subscriber Submitted Woodworking Tips and Tricks - Episode 7
- Read Time: 4 mins
- Hits: 5129
Often when I am filming a video, I wonder what kinds of improvements Subscribers to my channel might come up with, once in a while 2 or 3 people will even come up with the same ideas for improvements which always amazes me, that a few people can have the same ideas. This video is a bit of a mix of improvements and new ideas, although I'm not sure where you draw the line, but in any even, some great ideas submitted from Subscribers ... thanks to everyone who sent in ideas, and I still have a long list of others to cover in later videos ..
Watch it on Youtube: https://youtu.be/lMoxzTALfbQ
There were a few good ideas with regard to my vertical drilling jig ....
Easy Build Crosscut Sled for The Table Saw / Accurate Speed Sled
- Read Time: 7 mins
- Hits: 12079
Every table saw comes with a miter gauge for cross-cutting wood but often these are not the best for cutting wider boards. The fix for this is for woodworkers to make their own crosscut sleds ... which I also have, and I, of course, overbuilt mine so it can do lots of things and it's accurate, but it also weighs 26 pounds - yes I actually weighed it. It's a hulk of a thing and often way more than I need to do one or 2 simple cuts on a wide board.
Watch it on Youtube: https://youtu.be/W6JV6gYq_yI
Yes, I have a good quality aftermarket miter gauge, and it works fine, but for wider boards, it's cumbersome to use so time to make miter gauge that is quick and accurate to use ... a speed sled.
Upgrades to My Ridgid Oscillating Belt and Spindle Sander
- Read Time: 4 mins
- Hits: 9107
One of the handiest tools I own is my Ridgid Oscillating Belt and Spindle Sander that was recommended to me by a friend, many years ago and it has given me years of good service, but as I use it I find it has a couple of items that could use some updating, and thanks to a suggestion from Bill in Wichita, I finally go around to making these changes.
Watch it on Youtube: https://youtu.be/Kes9AHLX96M
The first update was to that annoying, reverse thread knob on to of the oscillating mechanism that allows you to change and secure spindles and the belts ...
Page 33 of 104