Lacquer Finishes
- Read Time: 3 mins
- Hits: 13075
For centuries, lacquer finishes have been used to give woodworking a long lasting, durable water-resistant finish. Lacquers are available in two styles: spray and brush-on, although they’re both among the fastest drying finishes. That said, brushing on a lacquer finish is more diligent and precise work and takes longer, but is also cleaner than spraying on finish.
What is Lacquer?
Lacquer tends often to be confused with shellac, which arises from shellac coming from the “lac” beetle. Lacquer, on the other hand, is derived from the resin of a varnish tree which is then harvested, distilled and combined with a lacquer thinner to create the common finish. Lacquer is also typically used with a variety of paints to deliver a strong, durable paint finish.
Today’s Lacquer
Lacquer today tends to contain another type of resin, nitrocellulose that combined with other ingredients, allows for a thin coat of lacquer to dissolve within an earlier coat which results in a hard, yet flexible finish. However, one disadvantage to the above is that nitrocellulose lacquer finishes have a high susceptibility to UV light.
Lacquer Application
As mentioned above, lacquer can be applied in one of two ways: sprayed on or brushed on. Spray-on finishes can be bought as aerosol spray cans or can be used with a pneumatic / airless sprayer. Though the former tends to be expensive, quality of finishes is also unbeatable, particularly for small projects. Also ensure that you work in a ventilated environment since solvents used in the lacquer are highly flammable and odours.
Brush-on lacquer finishes tend to dry quickly but not as fast as spray on lacquer. Start by using a bristle brush (preferably with high quality bristles) to apply the finish, but remember to work quickly by first adding a thin layer and not over brushing your work. Additional coats to even out the finish can be added in later.
One last thing: do NOT try to brush a spray-on application or vice versa, since spray-ons tend to dry faster.
Lacquer vs Polyurethane
An advantage to using lacquer finishes over polyurethane is that that for beginner woodworkers, they’re easier to apply, dry a lot faster and don’t need as many brush strokes for a complete finish. And though they may not be as long lasting as poly’s, they are a lot easier to reapply if and when anything happens. Additionally, lacquer finishes can also protect metals.
It is important to note, however that the two finishes don’t work well together; it is very much an either/or scenario.
The 10 Safety Rules Every Woodworker Should Know
- Read Time: 3 mins
- Hits: 205445
Woodworking is among one of the safest and enjoyable hobbies you can do, provided you adhere to a set of rudimentary and easy to follow safety rules. These woodworking safety rules are designed to be easy to remember and are mostly common sense. That being said, failure to comply with the safety rules can cause serious injury. The work shop is not the place to careless. It is the place to learn and adopt good safety working habits which will in turn make woodworking more fun and enjoyable.
1. Always Wear Safety Equipment
This might seem like a common sense kind of rule, but it’s an important one to remember. During usage of loud power tools like routers and surface planers, wearing ear protection is a noted advantage. Similarly, wear latex gloves while applying finishes. NEVER BE WITHOUT YOUR SAFETY GLASSES. These should be the first thing you reach for when entering the shop.
Sitting Bench Woodworking Plan Video
- Read Time: 1 min
- Hits: 8773
" One of the most popular woodworking projects, for hundreds of years is the simple “Sitting Bench”. The bench is easy to make, can be used inside and outside for person or commercial uses and when finished makes an attractive and useful piece of furniture. In homes, in recent years, the sitting bench is seeing revival because it is such a useful item and lends itself to the kitchen, the living room, the bedroom, the entry and almost any other part of the house you can imagine.
The sitting bench we have constructed here is made from something called Cedar of Lebanon or “Cedrus Libani”. This species is native to the Mediterranean but is also introduced in some more temperate areas of North America where it is grown as an ornamental tree because of it's faster growing characteristics.
The main feature of our sitting bench is to have been able to “book-match” the top or seat of the bench just at the point where the sapwood and the heartwood meet, creating a beautiful contrast in wood tones. We were also fortunate to obtain some 2” thick wood from the same tree that allowed us to make the legs for the bench without having to laminate thinner woods together.
Our sitting bench design is attractive and useful and will provide years and years of accommodation for relaxing ones wearing bones. The version we have put together here is made without any mechanical fastening devices (no nails, screws, staples or pins). The unit was entirely put together with glue, which will hold it securely, under all normal use for many, many decades to come.
We also wanted to incorporate a bit of “character” into the bench which is why we selected some pieces with knot holes. We also rounded over all the corners on both the top, sides and legs so that even with constant use, there is little chance of anyone bumping themselves on a sharp corner.
Copyright Colin Knecht
woodworkweb
Newbies Guide to Woodworking
- Read Time: 1 min
- Hits: 53306
“A Newbie’s Guide to Woodworking” answers common woodworking questions and more! It delivers solid information that woodworking beginners can use and benefit from. We have researched the leading websites and expert information and compiled it all in this convenient book!
There is all kinds of information available today that can help get you into woodworking as a hobby. Why should you spend your time and money investing in books and clubs when you can get everything you need RIGHT HERE!
As a beginner you can be confused by the immense scope of aspects to the wonderful craft of woodworking. To many, this can be frustrating and lead them to give up. However, woodworking can not only be a means of making a living, but for many, it is a fun and rewarding hobby.
The Complete Guide To Wood Finishing - Free eBook
- Read Time: 2 mins
- Hits: 60810
Wood finishing can be tricky and after spending hours on building your project you want to be sure that you get the best outcome possible.
In The Complete Guide To Wood Finishing you will learn how to get beautiful, professional results no matter what your project is, even if you have never tried your hand at wood finishing before.
You will learn about every step in the wood finishing process from a professional wood finisher with years of experience. Here are just a few of the chapters you will find inside.
Great New Measuring Tools You Should Know About
- Read Time: 2 mins
- Hits: 14144
“Measure twice cut once” I always hated this saying, and despite the fact that I forced myself to adhere to it, it STILL cut boards to the wrong length. It used to aggravate me that no one made a tape measure for right-handed woodworkers. Imagine this for a minute, you have a board that is 30 inches long and you need to cut 15-5/16” off it. You pick up your pencil with your right hand and your measuring tape with the left and lay it out on the wood. All the numbers are up-side down. Can you think of any other single thing we do that is more ripe for making mistakes than reading numbers up-side-down?
Oh sure, we can all read numbers up-side down, unfortunately we often read them wrong don't we, that's why we measure twice and cut once, and hope that our brains and eyes were coordinated in seeing the numbers correctly. Well there is HOPE, finally some tape measure companies have realized that seeing the numbers the right way up might be of help to us woodworkers. Infact, some have even made tapes that are for both left and right hand people because they have numbers you can read EACH WAY.
Page 101 of 103