- Read Time: 7 mins
- Hits: 37667
"Make Your Own Tools" the article said. I love the idea woodworkers making their own tools, so I decided to make use of some plans in an old woodworking magazine, and make myself three nice marking tools that will leave a crisp fine line on wood I am marking for cutting. The article said it was easy, and I liked the idea of using hardened steel and my own woodworking skills to make some of my own tools. Of course the first thing to do is obtain the materials, so off I went to the "metal supply store" to purchase the steel material for the blades. I asked for a piece of steel, according to the instructions. The grumpy salesman then asked "what hardness do you need?". I was totally lost ... what hardness of steel did I need? the article didn't say anything about that.
- Read Time: 4 mins
- Hits: 84170
"There are basically four types of table saws, 1) Bench or Portables , 2) Contractors , 3) Cabinet and 4) Sliding Table Saws used by large commercial outfits. The portables and contractors are the most popular because of their price point, space required and movability. The problem with portables and contractor saws is very often they just don't do the same quality job a cabinet table saw does. This is because they are not setup. No one has taken the time to set these saws up so they can make quality, accurate cuts. Well ... I have news for you. With a bit of work, your portable or contractors saw can often do the same or even better work than cabinet saws three or four times the price.
- Read Time: 6 mins
- Hits: 27415
If you haven't read Part I "Making a Performance Table Saw" of this series first, we recommend that you read that article as well because together these two articles complete this topic.
As a woodworker, you can only do so much upgrading of your table saw without spending some money. This article will tell you how to make your table saw really "sing", it may cost you a few dollars.
The real differnce in tuning up your table saw will be in the quality of your work and the reduced frustration by making sure your cuts are true, parallel and at right angles. It really make woodworking more fun and rewarding when things go together as they should, but click below to read more ...
I will start with the least expensive and move up. If you have never heard of a Power Twist Link Belt, now might be the time to think about this upgrade ... but while you are at it, if you have some of those inexpensive aluminum pulleys between your motor and your table saw arbor, throw them out as well and get some balanced steel pulleys.
Between these two items, not only will your table saw run smoother, it will also cut better because there is less vibration and the connection between the motor and the arbor will be stronger thereby eliminating any slippage.
- Read Time: 2 mins
- Hits: 26750
For years many of the table saw blade manufacturers have been preaching that we should be using blade stabilizers on our table saw blades in order to get precision cuts. But what about the costs, the draw backs, and do we really need these?? Read on for the answer, you could be very surprised at what you will find ...
First of all, blade stabilizers are not particularly cheap. If you get a good pair that has been balanced and trued, expect to pay in the vicinity of $20. True, they do cut down on blade vibration on some blades but what has caused that blade vibration in the first place? Is this a result of an inferior saw blade, OR, have you inadvertently jammed some wood between the blade and the fence and bent the blade yourself? In either case, you have a blade that is off true, for situations like this blade stabilizers may be helpful.