- Read Time: 6 mins
- Hits: 20717
Woodworking is filled with "special tools" that are only good for one or two jobs. The only problem is they do such a good job for their special design that using alternatives can be tedious at best. Such is the case with dado blades. They are only good for taking out huge chunks wood, but in most cases trying to do this other ways takes so much time, most of us would not bother.
There are basically two kinds of dado blades. The Stacked Dado set is the most popular because in most cases is does the best job of cutting dados and rebates, but there is also something called a dado wobble wheel blade which can also be used for making dados and rebates. The problem with the wobble wheel is that the bottom of the cut is arced somewhat, and more arced as the dado cut gets wider. The problem with this arcing effect is it makes for a less than perfect fit.
Cutting dados using a stacked dado set is not difficult, at least seemingly. The idea with any dado cut is that the piece that is to be fit into the dado cut should fit snugly in order to make it structurally sound and for the glue to work as best it can. It is IMPERATIVE that you make test cuts with your dado set before making the final cuts. If you don't you risk making cuts that are too large, and then you will a whole bunch extra work trying to make up for the mistake. The first time you omit the test cut will be the last time you omit it.
he best way to figure out the width of the cut you need to make is to measure the thickness of the shelf or other structure that you will be inserting into the dado cut. BUT DO NOT take this as the last measurement, make the test cut, try our the fit and work from there. Using a tape measure, will, in most cases not be sufficient enough to get the fit you will need, You will need a more precise measuring instrument.
Selecting a dado set can be agony for many woodworkers. There are many to choose from of varying qualities and with different features ... here are some of the things to look for ...
- Read Time: 4 mins
- Hits: 19649
Radial Arm Saws tend to be one of the most under-appreciated of woodworking machines which is disheartening, considering how versatile they are in the range of operations and tasks they are able to perform.
Why opt for a radial arm saw
While they may be on the pricier end of the scale, and they do tend to be both heavy and not typically fit to carry around easily. As a result, they are used mostly in professional shops where portability isn’t a priority.
That said, the variety of operations that a radial arm saw can perform from ripping to cutting bevels or miters, dadoes and rabbets, forming mouldings and in some instances, serving as router guides; is nothing short of amazing. However, like any tool there are trade-offs which come hand in hand with its versatility: difficulty in setting up cuts (as opposed to a compound miter) taking a longer time to rip stock (table saws rip faster). That said, the radial-arm saw is able to perform both these tasks, albeit a little slower than other tools, but again, it is a small price to pay.
- Read Time: 4 mins
- Hits: 26137
Although plate or biscuit joiners have little to no use beyond the one task they’re built for, they complete the task so diligently, that they are a must for every woodworking environment. Referred to as a biscuit cutter, this miniature saw cuts thin slots into edges of wood boards which are then used to hold two pieces of stock together via a biscuit. Hence the name.
What is a biscuit?
Before getting into the nitty gritty of biscuit joiners, it’s helpful knowing what a biscuit is and does. Biscuits are thin, oval-shaped slices of wood and are usually made from compressed beechwood. They are glued to a slot on the edge of one board and in a corresponding slot on the other, and are especially useful when gluing together individual boards when making table tops, cabinet constructions, etc.
- Read Time: 2 mins
- Hits: 14132
“Measure twice cut once” I always hated this saying, and despite the fact that I forced myself to adhere to it, it STILL cut boards to the wrong length. It used to aggravate me that no one made a tape measure for right-handed woodworkers. Imagine this for a minute, you have a board that is 30 inches long and you need to cut 15-5/16” off it. You pick up your pencil with your right hand and your measuring tape with the left and lay it out on the wood. All the numbers are up-side down. Can you think of any other single thing we do that is more ripe for making mistakes than reading numbers up-side-down?
Oh sure, we can all read numbers up-side down, unfortunately we often read them wrong don't we, that's why we measure twice and cut once, and hope that our brains and eyes were coordinated in seeing the numbers correctly. Well there is HOPE, finally some tape measure companies have realized that seeing the numbers the right way up might be of help to us woodworkers. Infact, some have even made tapes that are for both left and right hand people because they have numbers you can read EACH WAY.