Understanding What Makes a Quality Saw Blade
- Read Time: 4 mins
- Hits: 15938
Spending good money on crappy power saw blades is what every woodworker wants to avoid. Some distributors of saw blades can "dress up" an inferior saw blade with a bit of paint, some cool packaging and sell a $12.00 power saw blade for $75.00 The only way of knowing what is a good buy and what is not a good buy is to educate yourself on saw blades and how to recognize the good from the not so good.
here are basically 2 ways to manufacture saw blades, the cheapest and most popular is to "stamp" the blades our of sheets of mild steel. The second way is to use a harder steel and actually laser cut the blades one at a time out of the steel.
Woodworking Work Bench
- Read Time: 4 mins
- Hits: 32136
" The first thing every woodworker needs is a work bench. Even before any tool is purchased you need a work bench. There are a million designs and every woodworker has a different work bench, even if they are based on the same plan or design. A number of our members have asked be for more details on my work bench and so that is what this video is to do, review one option in work bench design.
Wood Thickness Differences / Rough to Planed
- Read Time: 3 mins
- Hits: 23956
On a trip to your local home depot or woodworking supplier you might notice the different wood sizes on display, and be scratching your head wondering what it all means. There are a couple important things to remember when purchasing stock.
2x4 vs 1 ½”x3 ½”
The first is that 1 inch doesn’t always mean “1 inch”, so while the label might read 2x4 it actually translates to 1 ½” x 3 ½”, because of dryness and milling methods. Wood tends to shrink when it’s dried and lumber mills make adjustments accordingly. That said, the length of a piece is generally not affected so a piece “measuring” 8’ is usually very close to 96 inches.
All About Radial Arm Saws
- Read Time: 4 mins
- Hits: 19648
Radial Arm Saws tend to be one of the most under-appreciated of woodworking machines which is disheartening, considering how versatile they are in the range of operations and tasks they are able to perform.
Why opt for a radial arm saw
While they may be on the pricier end of the scale, and they do tend to be both heavy and not typically fit to carry around easily. As a result, they are used mostly in professional shops where portability isn’t a priority.
That said, the variety of operations that a radial arm saw can perform from ripping to cutting bevels or miters, dadoes and rabbets, forming mouldings and in some instances, serving as router guides; is nothing short of amazing. However, like any tool there are trade-offs which come hand in hand with its versatility: difficulty in setting up cuts (as opposed to a compound miter) taking a longer time to rip stock (table saws rip faster). That said, the radial-arm saw is able to perform both these tasks, albeit a little slower than other tools, but again, it is a small price to pay.
Plywood Grading - Types of plywood
- Read Time: 4 mins
- Hits: 28712
When buying plywood from your local Home Depot, Rona, Lowes or other wood supplier, you might have noticed that all the plywood is "graded". The most common plywood grading scheme is from A to D, with A being the highest quality with zero blemishes and great sanding, and D being the worst with the greatest number of blemishes (allowed).
Grading also typically comes in pairs where each grade addresses a different side or “face” of the stock piece, ie one letter will address the quality issues of the front face and the second, the side opposite to the face. So for instance, an A-C plywood sheet would be highly finished on the front face with a relatively poorer finish on the back. Similarly, construction grade C-D (referred to as CDX) plywood, is great for structural use but not for projects requiring a high quality finish.
Bonding Types
Along with the plywood grading system, plywood comes in different bonding where each type is differentiated by the glue used to bind the layers (aka plies) of plywood. We’ll cover each in turn.
Interior Plywood
This type is made for interior use only, from hardwood and softwood species and is generally used in places where exposure to moisture is minimal, e.g. furniture, wall sheathing, cabinetry, etc. Interior plywood is available in most grades and comes in a variety of hardwood species like birch, oak and cherry.
Exterior Plywood
By far, much more sturdier and moisture-resistant than interior plywood, this type can be used outdoors and is easily available from local suppliers. Like its interior counterpart, it also comes in various grades—A-C, B-C and CDX are widely available—and hardwood species.
Marine Plywood
If you’re really looking for highly moisture-resistant plywood, look no further than Marine Plywood, which is both manufactured in top quality and uses the highest adhesives. And though commonly graded A-A for two highly placed faces, hardwood choices for exterior use (where the type would be most useful) are limited.
Structural Plywood
If you’re looking for beauty over brawn, this type is ideal although it is rarely found in a grade higher than C-D and is atypically used in construction sites (as concrete forms). Special resins are used to adhere the layers together and they are designed in such a way that the plies are less likely to separate.
Plywood Sizing
Just like hardwood and softwood sizes, plywood sizes can be just as confusing if not more. Although sheets are usually sold as 4’ wide, they may sometimes be found in 2’ and 5’ widths. Similarly, just as a typical plywood sheet’s length is 8’ they can also be found in 4’ and 12’ sizes as well as metric sizes. The variety can easily confuse the best of us.
And that’s just the beginning; the variation of sizes above will be a walk in the park compared to the thickness dimensions. Common sizes on the US market are ¼”, ½” and ¾”. That said, a ¼” plywood sheet is really 7/32”; ½” a 15/32” and ¾”, a 23/32”.
And though the 1/32” doesn’t seem like much, it can make all the difference when working with plywood. Consider this: a wood craftsman is constructing a bookshelf where a ¾” shelf is inserted into a dado cut into the shelf standards; the 1/32” gap will not only be noticeable, the dado will feel sloppy and unprofessionally handled. To counteract such a situation, the dado will need to be cut at 23/32”, ensuring a snug fit.
Lacquer Finishes
- Read Time: 3 mins
- Hits: 13063
For centuries, lacquer finishes have been used to give woodworking a long lasting, durable water-resistant finish. Lacquers are available in two styles: spray and brush-on, although they’re both among the fastest drying finishes. That said, brushing on a lacquer finish is more diligent and precise work and takes longer, but is also cleaner than spraying on finish.
What is Lacquer?
Lacquer tends often to be confused with shellac, which arises from shellac coming from the “lac” beetle. Lacquer, on the other hand, is derived from the resin of a varnish tree which is then harvested, distilled and combined with a lacquer thinner to create the common finish. Lacquer is also typically used with a variety of paints to deliver a strong, durable paint finish.
Today’s Lacquer
Lacquer today tends to contain another type of resin, nitrocellulose that combined with other ingredients, allows for a thin coat of lacquer to dissolve within an earlier coat which results in a hard, yet flexible finish. However, one disadvantage to the above is that nitrocellulose lacquer finishes have a high susceptibility to UV light.
Lacquer Application
As mentioned above, lacquer can be applied in one of two ways: sprayed on or brushed on. Spray-on finishes can be bought as aerosol spray cans or can be used with a pneumatic / airless sprayer. Though the former tends to be expensive, quality of finishes is also unbeatable, particularly for small projects. Also ensure that you work in a ventilated environment since solvents used in the lacquer are highly flammable and odours.
Brush-on lacquer finishes tend to dry quickly but not as fast as spray on lacquer. Start by using a bristle brush (preferably with high quality bristles) to apply the finish, but remember to work quickly by first adding a thin layer and not over brushing your work. Additional coats to even out the finish can be added in later.
One last thing: do NOT try to brush a spray-on application or vice versa, since spray-ons tend to dry faster.
Lacquer vs Polyurethane
An advantage to using lacquer finishes over polyurethane is that that for beginner woodworkers, they’re easier to apply, dry a lot faster and don’t need as many brush strokes for a complete finish. And though they may not be as long lasting as poly’s, they are a lot easier to reapply if and when anything happens. Additionally, lacquer finishes can also protect metals.
It is important to note, however that the two finishes don’t work well together; it is very much an either/or scenario.
Page 100 of 103