- Read Time: 5 mins
- Hits: 7574
I'm sure the wood jointer was the most frustrating tool for me to figure out how to set and use, but I stuck with it because I understood it was the foundation of everything I wanted to make that was straight and flat, and so I had to make sure I knew how to set up and use the jointer ... but I also learned there is a lot more to jointing wood ...
Watch it on Youtube: https://youtu.be/vb_s-NSxiyw
And one of the first things I learned was that setting up the jointer is job number one, and it needs to be done correctly or nothing else matters ...
- Read Time: 4 mins
- Hits: 6885
Pocket Hole Machines are new, but as time goes on, they become smaller, more versatile, and more affordable, especially for anyone who would like to get into the woodworking industry and actually make a living at it. Of course, one way is to build cabinets, which are always in demand and there is no letup in sight. The cabinet market is strong and will be for a long time.
Watch the video on Youtube: https://youtu.be/MoF57GYc7xg
In almost every market, anyone who can turn out good quality cabinets at a fair market price will have as much work as they can handle for the foreseeable future and of course, on way to accomplish this is to use pocket hole machinery to help make strong, attractive cabinets in a timely fashion.
- Read Time: 5 mins
- Hits: 47301
I think my Oscillating tool is over 10 years old now, and I bet it doesn't have 3 hours of work on it, but I wouldn't have traded it for the world. I bought at the time I was installing new vinyl windows in my home and embedding them into the old aluminum frames so that I would not have to have the stucco siding re-done. It saved me thousands, the windows went in flawlessly and the whole reno easily passed the energy audit.
Watch it on Youtube: https://youtu.be/prW2QdElZzg
The oscillating tool was used to cut away the aluminum rails on the old windows so they were flush, right into the corners, so the new windows were a good fit going in and without it, I would have spent countless more hours trying to cut and trim that aluminum away ...
- Read Time: 8 mins
- Hits: 14118
One of the things that I like about heading into a new year is it makes me think about the things I am doing and evaluate what I am doing and if I should be making any changes. For those of you who are following my YouTube Channel, you may recall a few weeks ago I was working with a "plane shooting board" and I made the statement that my plane was not a sharp as it could be ... but it mostly worked ...
Watch it on Youtube: https://youtu.be/zW0c87jdtdM
I could have stopped everything and got all my sharpening equipment out and sharpened the plane blade, but honestly ... the process that I have is a bit tedious, and when you are in the middle of a job and you want to get it done ... stopping to set up a whole sharpening system for one blade really takes away the workflow from the job at hand.