- Read Time: 6 mins
- Hits: 107802
In an ideal world we would all get to use our own woodworking tools and make lovely furniture and sell it for a nice profit and make a living. Sadly, reality says - this isn't going to happen for most of us - SO what are the alternatives.
One industry that I have always felt there was extra work in, and a good part-time business as well, is the CNC woodworking business. For those of you who need a quick refresher, a CNC machine is nothing more than a computer controlled router. On a computer you create some sort of a graphic, like lettering for a sign for example, send that information to the router through the computer and in a while the router carves out the exact same drawing you input into the computer.
There are a number of different types of CNC machines and they have different capabilities and sizes of wood that they can accommodate, so there can be some restrictions. For example, all CNC routers will go back and forth and up and down, but some have even more control, and could for example turn the bit to 90 degrees or more to actually make three dimensional items. But all that is detail, for now we want to look at the business of creating a CNC router business.
- Read Time: 2 mins
- Hits: 13536
One of the first things we noticed about the Bosch saw during initial testing was the vast difference in its appearance against the other saws available for the woodworking market. The company has chosen to integrate a 2-axis multi joint arm system with 12 sealed precision ball bearings which results in awesomely smooth traveling and fine control. Bosch has taken the sliding rail system and gone ballistic with its implementation bringing out a product that can, in our opinion, easily handle 1/32" accuracy. With its sealed ball bearings, you can forget about its performance degrading or the sawing becoming any less smooth over time. The saw also comes with an integrated "glide damper" allowing woodworkers to manoeuvre to different glide actions increasing or decreasing resistance, but the default mode is just fine too. Another key advantage of the kit is its unbelievable space saving capacity: it saves up to 12" of workspace, its arm flush folding into the back of the saw so no matter how small or cramped your shop is you'll always have space for this beauty.
- Read Time: 5 mins
- Hits: 16943
Sanding is one of the necessary but often most hated parts of woodworking. I have seen many different woodworkers go to great lengths to try to avoid sanding and sandpaper ... and I'm one of them. I know how important sanding is because I can see and feel the results on my projects, I just HATE sanding ... the noise ... the dust ... the repeated sandings and most of all the trying to sort out my pile of sandpaper grits, all contribute to this dreaded job.
I don't have any fancy sanding machines so all my sanding is done by hand and almost always outside so I can keep the dust away from my lungs and the rest of the shop.
Today I have decided to at make a new effort at trying to organize my sanding sheets, sanding discs and my sharpening sheets. I store these in all different locations then have trouble finding them so end up leaving them all piled on a small shelf in front of what is my slot shelves for sand paper. It's just not working.
- Read Time: 2 mins
- Hits: 21665
Setting jointer knives appears to be universally every woodworkers worst duty. When I talk to woodworkers, the one thing they hate doing most is setting jointer knives (although many also hated setting planer knives, but that`s another article).
One of the biggest problems is many did not know what height the knives should be set at. Many woodworkers believed that jointer knives should be set at the exact height of the outfeed table. Which in theory would be correct but in practice is not the best idea. I even had some woodworkers who adamantly believed the jointer knives should be even with the infeed table. This is the WORST thing you can do if you EVER want to get straight, flat boards.
If you set jointer knives BELOW THE LEVEL OF THE OUTFEED TABLE, the boards you run through your planer will be bowed like the lower runners of a rocking chair. The more you run them through the jointer the more bowed they will get ... to the point, the only way to correct the bowing is to mark a straight line down the length of the board and run the board through a table saw - freehand. THEN adjust your jointer knives correctly and start all over again runing the board through the jointer.