- Hits: 2144
Sometimes I like to make things just for the experience of learning how to make them, which is exactly what I did with this Milking Stool. I have made some stools in the past but not like this one, and so I understand the techniques and how the spline wedges that will hold the legs in place need to be placed at 90 degrees to the angle of the grain of the top of stool otherwise the pressure will often crack or split the seat of the stool.
What I had never done before was to use Arbutus or Madrone or even Madrona as it is also sometimes called, (species name- Arbutus Menziesii) in making the legs. Working with Arbutus is always a challenge, and in this case the wood was aq bit green so I wanted to see just how it turned and how much shrinkage there would be when it dries.
Watch this and other similar videos on YouTube - https://youtu.be/ynQN1Yfa28M
I have worked a bit with Arbutus in the past. When it is dry it is very hard and tends to be chippy to work with. In my experience it doesn't often crack as it dries, as long as it is allowed to dry slowly, and depending on the thickness, this can take months or even years to air dry fully. It's that dense a wood.