Make a Mitre Gauge Tapering Jig for the Table Saw
- Read Time: 5 mins
- Hits: 16149
One of the reasons there are so many different woodworking jigs is that one jig that does a specific job, may not necessarily perform a similar job when needed, or it may be too cumbersome to use. Such is the case with this Table Saw Mitre Gauge attached Tapering Jig or Wedge Making jig as some call it. This jig is not well suited for making things like tapered legs where there are tapers on all 4 sides. This is because when you taper 2 opposing sides, the last 2 sides need support in order for them to make equal angle cuts, and you also need to compensate for the width of the saw blade with something like veneers. It can be done, but this jig is very cumbersome for that kind of cut. This jig I made in a previous video is far better for making tapered legs and for trimming uneven edged wood, you can check it out here.
Watch it on Youtube: https://www.youtube.com/embed/jzc5uil5_-s
This tapering jig is far more suited for smaller, one or maybe 2 sided cuts. I like it because it is variable in many ways including the thickness of stock, width of stock and quite wide variable angles of wedge or tapered sizes. I made mine replicating a 30 - 60 degree triangle, only because it gave me different lengths of the triangle to work with ...
>>>> Link to Woodworkweb Amazon Affiliate Store - https://www.amazon.com/shop/woodworkweb <<<<
5 Quick Clamp Hacks Part 2 - Woodworking Tips & Tricks
- Read Time: 5 mins
- Hits: 12622
Clamping is a big part of woodworking whether it's part of clamping and gluing wood together, assembly or just some temporary holding that needs to be done. There are so many different kinds of woodworking clamps, I loose track of what is available and, believe it or not, I don't have every conceivable woodworking clamp available ... but some days I wish I had.
Watch it on Youtube: https://youtu.be/GraXTJiteDY
For me, clamping and gluing boards together is probably my most common kind of clamping and for this, I use the old style bar clamps. I guess I could upgrade to something more modern, but these work for me, they are somewhat inexpensive and I have them in different sizes so they are pretty convenient for me, except for one problem ...
>>>> Link to Woodworkweb Amazon Affiliate Store - https://www.amazon.com/shop/woodworkweb <<<<
3D Printing in the Workshop / 3D Printers for Woodworking w/ the Creality CR-10
- Read Time: 4 mins
- Hits: 10488
The nice folks at GearBest.com got in touch with to see if I was interested in reviewing one of their 3D printers. I thanked the but told them 3D printers were not really woodworking machines. They then told me they have a "wood" type filament available. At that point, I thought ... how do I know a 3D printer is not a woodworking tool, I've never tried one, maybe there are some things it can be used for and maybe I should try this, and so sometime later this 3D Printer arrived.
By the way, you can click any of the Bold Links on this page to see what I am talking about, and you won't lose your spot here.
Watch it on Youtube: https://youtu.be/Xd4JbxWDT0Y
The Creality CR-10 printer comes in a fairly large box, which to me was a good thing, because it told me that it wasn't going to be a bunch of parts and pieces I had to figure out how to put together, and sure enough, there are of course some components that need to be set up, but it is substantially together when it arrives. I also received a roll of the Wood Filament for the printer but also took some time to investigate what other 3D printer options that are available, always good to know what other things might be needed some time.
3d Printer Wood Filament
Of course, it took some time to unpack and set up the printer and to connect it with a computer and set up the app that communicates what the printer will be making, but that's all part of the fun of getting into new things.
>>>> Link to Woodworkweb Amazon Affiliate Store - https://www.amazon.com/shop/woodworkweb <<<<
5 Quick Woodworking Hacks - Woodworking Tips and Tricks
- Read Time: 5 mins
- Hits: 11673
Woodworkers are a generally thrifty and innovative group of people, and always coming up with ways to save time and money and often use wood to make things that suit their own needs. The one thing I learned the hard way is the lids on metal cans, like paint cans do not always seal 100 percent and if you don't use up what's in them, they can dry out, or even just dry to a point where they have to be thrown out because they cannot be rejuvenated. I learned that you can fix this by using a thin sheet of plastic from a plastic bag to help seal and preserve the contents.
Watch it on Youtube: https://youtu.be/hUOhQVYP2sc
This is how I have managed to keep my only container of wood putty or filler for 20 years or so ... and speaking of wood fillers ...
Adjustable Center Finder Jig / Center Marking Jig
- Read Time: 3 mins
- Hits: 72620
It seems I am forever needing to cut a board into equal halves. I always have a tape measure handy, but sometimes it's just quicker and more accurate to use a center finding jig to find the center of a board, especially when they are strange widths ... like 13-9/16. Oh sure I can stop and figure this out in my head ... of use the metric scale, or just grab my center finder jig and have it done in a few seconds ... and anyway, it's fun to make these jigs and see if there are ways we can make them better and more useful.
Watch it on Youtube: https://youtu.be/54IMIBnKEnw
This version of the center finding jig has been around for many, many years but I have never seen an adjustable version ... not that there aren't some out there somewhere, just that I have never seen one.
5 Quick Thickness Planer Hacks - Woodworking Tips and Tricks
- Read Time: 4 mins
- Hits: 30621
Thickness Planers are one of those woodworking machines that only has one job .. to take our wood and make it evenly thick from end to end and there really is very little else it can do. Despite this limitation the thickness planer is a needed machine and with a bit of innovation we can give a little bit of extra work to help it pay it's way ...
Watch it on Youtube: https://youtu.be/XnfMAL8BwTA
Here are a few tips and tricks you can try with your planer to get some better end results ...
Page 57 of 103