Turning Your Router Table into a Biscuit Joiner - Slotting Router Bits
- Read Time: 5 mins
- Hits: 13725
Yes, it's true, for the cost of a bit you can turn your router table into a biscuit joiner and save yourself ... well, $100 to $200 or if you look at it another way, you can get more use out of your existing router table by just adding a biscuit joining bit to your collection.
Watch it on Youtube: https://youtu.be/P2ee0uIyzQATo start with, here is Amazon link to the section that includes a few different options for the bit Amazon Store. You can purchase these bits in parts or as a complete unit that also includes 2 top bearings and you can select 1/4 inch or 1/2 inch, whichever you prefer, note some routers ONLY take 1/4 inch size bits.
Upgrading the Table Saw Outfeed Table with a Quick Release
- Read Time: 4 mins
- Hits: 15933
I am so happy with this Table Saw Outfeed Table, it was a major upgrade to my saw and allows me to quickly flip up the outfeed table when I need it and drop it down when not in use to give me more room in my shop. The only thing that is a bit of an inconvenience is having to feel around underneath the outfeed table to find the releases every time I want to drop it down ... so, time to make a quick release mechanism.
Watch it on Youtube: https://youtu.be/BwhzXUlvQoU
The nice thing that I liked about these brackets was that the release is at the very tip of the arm, which in this case is also going to make it a bit easier to add the quick release mechanism.
Subscriber Submitted Workshop Life Hacks: Woodworking Tips and Tricks
- Read Time: 5 mins
- Hits: 7852
I love it when viewers send me THEIR woodworking Tips, Tricks, and Hacks ... for me to share with everyone. That's what makes a "woodworking community" which is what I have been working toward since the inception of this website almost 20 years ago. In all these tips and tricks that I publish and video, many, many viewers tell me that there is almost always at least one "nugget" in the list that they didn't know about that they are going to implement.
Watch it on Youtube: https://youtu.be/ItsSBHwqKBw
The first one on this episode's list is from Michael who has shared a great way to screw in eyelet screws, and at least for me something I struggle with often, like when I am making picture frames and the final step is to install the wire on the back of the frame for hanging ... do you think I can hold on to those tiny eyelets?
Drying Wood with Dehumidifier Wood Kiln - How to Dry Wood
- Read Time: 11 mins
- Hits: 58028
For me, one of the pleasures of woodworking is being able to dry your own wood. Not only does it save you money, but I also enjoy being involved in the process. The whole purpose of drying wood is to get the moisture content of the wood down to a point where the wood is more stable, and often somewhere between 8 and 14 percent.
There are a few different ways of drying wood. Stacking your wood up and letting the air flow around the wood is, of course, the oldest, and still very popular today, but if you want to accelerate the drying process you could use solar, dehumidification and high heat drying such as with a kiln. All of these are methods that work when drying wood.
Watch it on Youtube: https://youtu.be/LF8vCwsHp1g
Outdoor air drying is a very common, and of course the cheapest way of drying wood, but for most of us, air wood is still too wet for furniture making and the longer it dries out o doors, it does not get any drier. If you are building fences, sheds, houses and other similar forms of construction, outdoor air-dried wood is just fine.
How to Build an Innovative Folding Outfeed Table for The Table Saw
- Read Time: 6 mins
- Hits: 44828
Most table saws have very short built-in outfeed tables which is why roller stands and flip stands have become so popular, but they have their own problems. The ideal outfeed table is an actual table that is either attached or very close to the outfeed of the table saw so that longer boards will simply slide out onto the outfeed table and make for a safer, and better cutting situation.
Watch it on Youtube: https://youtu.be/K1wys-PPbRw
The floor in my workshop is quite uneven and I move my table saw around a lot, so having a table with legs attached would not work. I know that if I had a flip out table that attached to my saw that had legs, either the legs will get in the way of my camera dolly, or tripod or ... more likely than anything, I will accidentally kick the leg with my foot on the way by and break, or bend it. The other alternative I have seen is a stabilizing leg that is attached to the underside of the table saw and has some pins that you can insert and the whole thing slides up and down on a sliding dovetail leg. Not a bad idea, but I don't want to have to get on my knees every time I want to set up an outfeed table and I just know, where I live, the sliding dovetails will swell in the winter and bind on me ... neither of these appealed to me.
Building a Economy Melamine Utility Cabinet - Cabinet Making
- Read Time: 6 mins
- Hits: 35545
It's fun to use different materials and different techniques from time to time in woodworking because it helps to expand our knowledge, techniques, and experience. Oh, and the fact that I am able to cross something off my list of "things to do around the house" is an even greater motivator. Not that are on my list were put there by me, and the shelving unit in the laundry room is one of them that was way down my list, but, while I have these Maksiwa Machines, the Edge Bander and Trimmer, I might as well use them while I can ...
Watch it on Youtube: https://youtu.be/v8KJYCVwbao
I don't often get a chance to use Melamine products because I am usually working with natural woods, so this is a real treat for me to work with something totally different and when it's done being built ... it's ready to use, no sanding, no prep work, no finishing ... it's ready to use right away ...
Page 44 of 103