- Hits: 2775
I am always intrigued by what kinds of things can be made from wood ... such as a wooden case for a smart phone. Some of you may recall I made a case for another smart phone a few years ago. It was really a prototype to see if it could be done and what it would look like. The case was a bit on the thick side, but other than that, it worked well and looked great, but most of all, you get to learn things when you actually go about making things, I learned lots when making that first case.
With the knowledge that my next case needed to be thinner, I decided that the best way to do this would be to make my own very thin plywood back, by gluing together veneers. Before I started this whole process I decided that the workshop and workbench was not the safest place for my phone. In all the handling that would be needed to be done, I thought it would be just like me to drop it on the floor or drop a tool on it and break the glass ... so I made wooden blank of the phone, exactly the same size and thickness. This way I wouldn't have to worry that some calamity would happen to in the process.
To be honest, I tried a few different kinds of veneers that I had on hand, but that one that worked best for this application was some Phenolic Backed veneer that came from Oakwood Veneer Company. I sandwiched the Oakwood veneer between some plain, tight grain veneer I had on hand. The process is shown in the video. Once the back was made, the next process ...