Amana In-Stile and Rail System -- woodworking

2-Wing With Ball Bearing Guide 3/4" Material
Our rail and stile sets give you two complete bits, one for doing the rail cuts, one for the stiles. Make cabinet doors and all varieties of frame-and-panel assemblies for furniture and architectural applications. The same three profiles are available in either configuration. Bits in this set have profile and groove or rabbet cutters and ball-bearing guide mounted on a 1/2" shank. Respacing of the components should only be necessary – using the provided shims – after the cutters have been resharpened. Use in a table-mounted router. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles.

Adjust panel groove width 3/16" to 9/32" for 1/4" plywood; 7/16" to 17/32" for 1/2" plywood.
Cut frame stock for 5/8" through 1-1/4" thickness.
1/2" shank.
Each set includes two carbide-tipped bits for long life.