Roman Ogee bit. 2 Flute with Ball Bearing Guide.
Top quality bits that meet the high demands of Rockler Woodworking and Hardware. A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life.
Quality performance features include:
- K10 and K20 grade carbide for clean cutting action.
- final sharpening with 600 - 800 grit diamond wheels.
- Precision balanced for smooth operation.
| 2 Flute With Ball Bearing Guide : Roman Ogee |  |
| Tool No. | D | R | B | d | L | | 48827 | 1 | 5/32 | 5/8 | 1/4 | 2-1/8 | | 49155 | 1 | 5/32 | 5/8 | 1/2 | 2-1/2 | | 61804 | 1-3/8 | 1/4 | 7/8 | 1/4 | 2-1/4 | | 61846 | 1-3/8 | 1/4 | 7/8 | 1/2 | 2-5/8 |
|
If you are not 100% satisfied with these bits, send them back for a refund.
Router Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2" shank router bits whenever possible. 1/2" shanks provide better stability with less vibration to produce a smoother cut and longer cutter life.
2) Make multiple light passes rather than one heavy cut.
3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back 1/16 to 1/8 of an inch.
4) Use a router table whenever possible.
5) When using large diameter bits, reduce the RPM of your router. Then test your set-up on scrap lumber.
6) Always follow your router manufacturer's recommendations. |
