Amana Cove Router Bits -- woodworking

These bits are truly great for giving your piece a classic look and feel! Amana cove bits come in 1/4" or 1/2" shanks. See order form for specific radius and height.

2 Flute With Ball Bearing Guide
Tool No.
R
D
B
d
L
61697
1/4
7/8
9/16
1/4
2
49130
1/4
7/8
9/16
1/2
2-3/8
48744
3/8
1-1/8
9/16
1/4
2
61515
3/8
1-1/8
9/16
1/2
2-3/8
48751
1/2
1-3/8
3/4
1/4
2-1/4
49148
1/2
1-3/8
3/4
1/2
2-1/2

If you are not 100% satisfied with these bits, send them back for a refund.

Router Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.

1) Rockler recommends using 1/2" shank router bits whenever possible. 1/2" shanks provide better stability with less vibration to produce a smoother cut and longer cutter life.
2) Make multiple light passes rather than one heavy cut.
3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back 1/16 to 1/8 of an inch.
4) Use a router table whenever possible.
5) When using large diameter bits, reduce the RPM of your router. Then test your set-up on scrap lumber.
6) Always follow your router manufacturer's recommendations.