Rockler Router Bit Profiles We've expanded our line with these new profiles! Features include: • K10 and K20 grade carbide for clean cutting action.
• Final sharpened with 600 grit diamond wheels.
• Precision balance for smooth operation.
• Baked-on coating to reduce pitch and resin build-up.
• Unconditionally guaranteed!
| Dia. | Height | Shank |
| 1-1/16" | 43/64" | 1/2" |
If you are not 100% satisfied with these bits, send them back for a refund.
Router Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2" shank router bits whenever possible. 1/2" shanks provide better stability with less vibration to produce a smoother cut and longer cutter life.
2) Make multiple light passes rather than one heavy cut.
3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back 1/16 to 1/8 of an inch.
4) Use a router table whenever possible.
5) When using large diameter bits, reduce the RPM of your router. Then test your set-up on scrap lumber.
6) Always follow your router manufacturer's recommendations. |
