Amana Corner Beading Router Bit 
| Item No. | Item | Price | | 61499 | Amana Corner Beading Router Bit - Corner Beading Bit 1/4" bead dia., 1/4" shank | $54.49 | | 61523 | Amana Corner Beading Router Bit - Corner Beading Bit 1/4" bead dia., 1/2" shank | $54.49 | | 90095 | Amana Corner Beading Router Bit - Corner Beading Bit 3/8inch bead dia., 1/4" shank | $57.49 | | 90078 | Amana Corner Beading Router Bit - Replacement Bearing for 1/4" Shank Router Bit | $7.49 | | 90082 | Amana Corner Beading Router Bit - Replacement Bearing for 3/8" | $8.99 | | 11297 | Amana Corner Beading Router Bit - 5-1/2 Ounce Aerosol Bearing Lubricant | $14.99 |
Perfect for reproducing and restoring antiques. May also be used as a bull nose radius bit when installed in a router table. | 2 Flute With Ball Bearing Guide |  |
| Tool No. | R | D | A | B | d | L | | 61499 | 1/8 | 7/8 | 1/4 | 9/16 | 1/4 | 2-1/8 | | 61523 | 1/8 | 7/8 | 1/4 | 9/16 | 1/2 | 2-1/2 | | 90095 | 3-1/6 | 1-1/8 | 3/8 | 11/16 | 1/4 | 2-1/4 |
 If you are not 100% satisfied with these bits, send them back for a refund.
Router Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2" shank router bits whenever possible. 1/2" shanks provide better stability with less vibration to produce a smoother cut and longer cutter life.
2) Make multiple light passes rather than one heavy cut.
3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back 1/16 to 1/8 of an inch.
4) Use a router table whenever possible.
5) When using large diameter bits, reduce the RPM of your router. Then test your set-up on scrap lumber.
6) Always follow your router manufacturer's recommendations. |
|
In association with
 | All brands and product names are trademarked or registered trademarks of their respective companies.
Prices, specifications, and availability are subject to change without notification. E.&O.E.
Image & Description provided by and used with permission from Rockler Companies, Inc..
Page revised: Friday, April 18, 2008. |
|
