Amana Beading Router Bits - 1/4" Radius x 1/2" Height x 1/4" Shank
$47.49
90103
Amana Beading Router Bits - 3/8" Radius x 5/8" Height x 1/4" Shank
$47.49
Excellent round over bit. 1/4" Radius x 1/2" Height x 1/4" Shank.
2 Flute With Ball Bearing Guide : Beading
Tool No.
R
D
B
d
L
90101
1/4
1
1/2
1/4
2
90103
3/8
1-1/4
5/8
1/4
2-3/16
90106
1/2
1-1/2
3/4
1/4
2-1/4
If you are not 100% satisfied with these bits, send them back for a refund.
Router Safety Tips: It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2" shank router bits whenever possible. 1/2" shanks provide better stability with less vibration to produce a smoother cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back 1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router. Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
All brands and product names are trademarked or registered trademarks of their respective companies. Prices, specifications, and availability are subject to change without notification. E.&O.E. Image & Description provided by and used with permission from Rockler Companies, Inc.. Page revised: Friday, April 18, 2008.
If you are not 100% satisfied with these bits, send them back for a refund.