Build a crib that easily transforms into a daybed, then a full sized bed and back again. Use the Rodless Crib Gate Hardware and Spring Kit, and Fastener Hardware Kit to create an heirloom quality project that will last for generations. Standard full size crib mattress works for both the crib and the small daybed. Add a full sized box spring and mattress for the full sized bed.
The Rodless Crib Gate and Springs Hardware Kit allows you to raise and lower the crib gate easily. Apply a light amount of pressure to the lower gate, lift up with one hand and the gate slides down smoothly. Simply raise the gate to the upper position and it automatically locks in place.
Kit includes rod less gate hardware and standard full size crib spring.
Gate hardware is brown and white plastic, and screws are provided.
This plan requires both the Rodless Spring Gate Hardware Kit and the Fastener Hardware Kit to complete the project. The plan also requires 16 dowels 3/8" x 1-1/2" in size.
Item #32405 and #32627 Rodless Crib Gate and Springs Hardware contains:
- 1 each - Crib Springs
- 1 hardware package containing:
- 1/4" - 20 x 3/4" Machine Screws
- #7 x 5/8" Flathead Nickel Screws
- #4 x 5/8" Flathead Nickel Screws
- #10 x 5/8" Flathead Nickel Screws
- #7 x 1" Flathead Nickel Screws
- 1/4" - 20 Threaded Insert
- Instruction Sheet
Item #33874 Fastener Hardware Kit contains:
- 4 each 1/4" - 20 x 3/4" Machine Screws
- 1 pack of 12 1/4" - 20 x 3-1/2" Connector Bolt
- 1 pack of 12 1/4" - 20 x 2" Connector Bolt
- 5 packs of 8 #33183 1/4" - 20 Threaded Brass Insert
To comply with the U.S. Consumer Product Safety Commission crib regulations, spindles for cribs should be no more than 2-3/8" apart to prevent entrapment.
