Tormek T-7 Sharpening System

Wet stone grinding with a slow running speed gives you full control while grinding. The wheel will not shatter, and there are no dangerous sparks. The quiet vibration-free industrial motor is rated for continuous operation, and the honing wheel has a coupling for fast removal.

With the Tormek System, you do BOTH the initial grinding (when you shape the tool and create the optimal edge angle) and the sharpening on the same grindstone. The grindstone can easily be changed from fast grinding to fine sharpening. Because the grinding and sharpening utilize water cooling, there is no risk of burning the edge and drawing the hardening from the steel. The honing and polishing is carried out on a leather honing wheel.

Features:

• Square Edge Jig accepts blades up to 76mm or 3" in width.
• Square Edge Jig features safety stops, which prevent the tool from slipping off the stone.
• Truing and Dressing Tool with screw feed: Trues the grindstone exactly round and flat. Guided by the Universal Support, which also guides the jigs. Dual knobs for smooth feed across the stone.
• Stainless steel hardware: Prevents rust and wear on bearings.
• Universal Support with acme thread: Round section without flat machining makes it faster to change position.
• Improved Horizontal Base: Double locking screws and tighter fit for maximum precision.
• Micro Adjust with scale: For a predetermined cutting depth when using the TT-50 Truing and Dressing Tool.
• 7-year warranty applies to all customers, including industrial users.

The T-7 model includes:

• Square Edge Jig
• Truing and Dressing Tool
• Stone Grader
• AngleMaster
• Honing Compound
• Handbook
• Tormek DVD

OPTIONAL ACCESSORIES :

37605 - Profiled Leather Wheel (LA-100) Excellent for inside honing and polishing gouges and V-tools.

60566 - Diamond Stone Truing Tool Trues the stone to perfect roundness and an exact, flat grinding surface.

60574 - Stone Grader (SP-650) Grades the grinding stone to a fine grit in just 15 seconds. Also renews glazed stones.

18772 - Universal Gouge Jig (SVD-185) Puts the edge back on V-and fingernail-shaped tools and gouges with a maximum of 1" width. Also for turning cutters.

27774 - Short Tool Jig (SVS-32) For straight shanked carving gouges and V-tools down to 1-3/4" length. For short wood chisels and tools for power carvers. Max tool width 1-1/4"

60483 - Tool Rest (SVD-110) For turning scrapers, cabinet scrapers, carving scorps and inshaves.

60491 - Axe Grinding Jig (SVA-170) For carving and carpenter's axes. Max. axe size 6-1/2".

60509 - Scissors Jig (SVX-150) Puts the maximum sharpness on all sizes of scissors and shears.

60517 - Planer/Joiner Blade Jig (SVH-320) Works with HSS blades of any length.

60525 - Long Knife Jig (SVM-100) Gives greater stability on longer, thinner blades. Minimum blade length to be used with this jig is 4-23/32" .

60533 - Knife Jig (SVM-45) Recommended for knives with a minimum blade length of 2-3/8". Plus straight or curved spoke shave blades.

37592 - Multi-Jig (SVS-50) For turning skew chisels, straight or radiused edge parting and beading tools and roughing gouges. Straight carving gouges up to 2" width.

24427 - Machine Cover (MH-380) Keeps your system free from dust and debris when not in use.

See more Tormek System Details