×

Notice

The forum is in read only mode.

Homemade Cross Cut Jig

  • david cooksey
  • david cooksey's Avatar Topic Author

david cooksey created the topic: Homemade Cross Cut Jig

Purchase the following:
1/2 Sheet of CDX Plywood
2- 1X4's 8' long
2- 1/4" aluminum angle iron 48" long
24- #12 Flat head screws 1 1/2" long

Cut 1X4's
2- Pieces 48" long
2- Pieces 12" long

Make shure everything square



#1
Attachments:
  • Posts: 486

colin replied the topic: Re: Homemade Cross Cut Jig

Excellent ... I love this. It's simple, parts are easily available and it's not too difficult to put together. I have always maintained that there are far more uses for circ saws than what they are used for ... this is a perfect example. Well Done Dave
#2
  • PaulD
  • PaulD's Avatar

PaulD replied the topic: Re: Homemade Cross Cut Jig

Great, easy to build jig ... thanks for sharing.
#3
  • david cooksey
  • david cooksey's Avatar Topic Author

david cooksey replied the topic: Re: Homemade Cross Cut Jig

I came up w/ these ideas when we were on a Job Site and our portable Table Saw's motor went Bonkers and we were 48 miles away from any place that might have a Portable Table Saw
#4

Join Us On:

 YouTube
    Facebook
    Instagram
    Twitter
   Pinterest
   Google+