If you are interested in being a featured member, please send us a -brief- email outlining what you do. We will respond to you a request once it has been reviewed by the team. (Left: Paul Dalcanale and Colin Knecht, Creators of Woodworkweb)
We would like to give a shout-out to our friends at bunkbeds.net. Check-out their great selection of wood bunk beds.
We don't always get a chance to meet our Feature Members in person, but happily, I can say this is not the case with Seth Rolland. I attended a woodworkers meeting where Seth was giving a presentation about his work, and I can say it was truly one of the most inspirational talks on woodworking I have seen.
Seth Rolland has been making furniture for over 20 years. He first began his woodworking in Taos, New Mexico where he participated in a "weekly market".
Almost every woodwork has used stain to change the color or wood at one time or another, but few of them have ever used "wood dye" to color wood, in fact, few woodworkers have even heard of wood dye so now is the opportunity to see the differences and understand the pros and cons of each. With this information we can then go about choosing which products to select for any given project.
Stain - Pretty much the standard of the woodworking industry, wood stains are primarily made from dirt. Yup, that's right dirt. Ground up and pulverized clays of various colors are the primary ingredient in stains. They are then often mixed with some sort of oil type base and a few other ingredients like driers and emulsifiers to give them specific paint-on and adherence features. Because stains are made from earthen material they are very color fast, in fact, that is why they are used on fences, the outsides of buildings and many other out-door applications, because they are so color fast. Basically if you can get a stain to adhere to a wood, and leave it in the sun, it will barely fade after years and years of exposure. What actually happens in most cases is the stain dries and slowly falls off after time because the oil base can no longer keep it adhered to the wood. The key with stains, is they are earthen and that when they are painted on, they are primarily coated on the surface of the wood. There is very little penetration of the stain into the wood, mostly the stain lays on top the wood. Because most stains are oil based, they don't raise the grain of the wood and all in all, for most projects they give a great finish.
So now you may be wondering, if stain is so good, why would anyone even bother with a wood dye? The answer of course is in what are the properties of wood dyes and why should a woodworker know about them and want to use them? Read on for the answers ....
When we have no other criteria to judge things on, we always select the cheapest product. Well, most of us do. Isn't it always true that once we know some things to look for in the products and services we purchase, we are all willing to pay more if there are benefits to the more expensive product. This is always the case with the lowly paint brush. I have done it myself. There I stand in front of a rack of paint brushes, they all look pretty much the same to me sitting their in their packages and priced from $1.99 up to $24.99 ... so, what do I do, I purchase the cheapest one. Then when I get home and start clear finishing my woodworking projects and find that I am really making a mess of an otherwise great project, and something I spent a lot of time making, and how the finish I am putting on is looking like crap. What's the first thing I blade ... the can of finish. BUT little did I know the real culprit was ME by selecting a cheap paint brush in the first place.
I can honestly say that when it comes to purchasing paint brushes, the more you pay the better quality you are going to get. But like all things, when you are armed with knowledge it makes all the difference in the world, and so ...
In the scheme of things, there are not many actual "tools" when it comes to finishing of wood projects. Sure there are paint brushes of various types and sizes and large selection of spray type tools and attachments but other than that, there is not a lot avalable. One of the challenges of so many of who use paint brushes to apply stains and final coats is trying to finish an entire project in one session. That often means having to finish all the sides that "show" without having to worry about the finish being marred. In most cases we have to do the finishing in 2 sessions, which contributes to making the finishing process long and tedious. Thankfully someone has addressed some of the finishing challenges that woodworkers encounter while finishing and have invented some products to help meet these challenges.
The first product is the Veraspin 360. Nothing particularly high tech about this unit, it is basically a plastic turn table that comes in 2 sizes, 11" and 16". True, it spins around in a 360 degree circle nicely, but the real benefit to the Veraspins' are the built in little "nubs" on the top surface. These little nubs are used to help hold 2 other products that attach on top of them to make a great finishing platform.
Finishing woodwork projects is the last step in a labor of love so it's critical that the finish show off the hard work, and the details of the wood . Add this to the fact that I have always tried to use products that are eco friendly and the list of finishing products starts to diminish signficantly. The only problem is that in many cases, the eco-friendly products I have tried have not given me anywhere near the kind of finish I wanted ... or expected ... until I discoverd OSMO.
If you have never heard of the word OSMO, don't be too alarmed. It is wood finishing product developed in Germany about 30 years ago. Sadly, it has taken many, many years to hit the North American markets. One of the biggest advantages of OSMO is that it is eco friendly, and that is because it is made primarily from natural, renewable sunflower oil and plant waxes. In many countries in Europe, with their very high population density, their laws and restrictions on finishing products is quite advanced. OSMO is often a preferred product as it is so safe that it is even approved as a finish for children's toys! Originally created as a floor finishing product, OSMO has since been adapted for use in other ways, but knowing that it is used as floor finishing material helps to understand just how durable this product can be.
For woodworkers, the benefits are numerous, The product will not chip, flake, blister or peel, it has an enormous coverage which means it is not expensive to use. Best of all, it is easy to apply and makes a great finish, AND if it is being used in situations where "finish wear" is a concern, OSMO can be re-finished over top of it'self with only moderate sanding or roughing of the area to be re-finished. It reall is a remarkable product. OSMO comes in both an interior and exterior grade. The main difference with the exterior grade is the addition of UV inhibiting charcteristics.
IT IS VERY IMPORTANT to understand the OSMO is NOT applied to woodworking projects like many of the finishing products you may be accustomed to using. OSMO is NOT a product for the spray gun, not is using it with most standard paint brushes recommended. OSMO must be applied with a very thin coat, which means it requires special application.
We were very lucky to know expert woodworker and finisher Phil Makin of Frameworks Services, who kindly took the time to explain OSMO to us and take us through the steps of finishing with OSMO. We wish to acknowledge Phil for his time and recommend him for your wood project requirements, sample of which are posted in the second part of this article.
Making boxes with the router is argueably one of the most fun things you can do with a router table. Not only that, you get to turn out objects that almost everybody loves and can use ... and it makes you look great. The other thing with boxes on the router table is by taking a design like this and modifying the sizes a little bit, you can make a whole range of different sizes, with or without hinged tops and all sorts of different and unique add-ons. Boxes are one of the most popular items for many people because they look great and are functional. They can be varied in so many different ways, different woods, contrasting woods, stains and dyes, final finishes, glossy, satin, matte, or by making them from laminated veneer woods and highlighting with contrasting wood, the variables are endless.
In this article we are making what we call the One Piece Box because it can be made from on piece of wood. The finished box is 4 inches square and if you can make it either with a routed lift off top as shown in the video, or you can leave the top on and cut it off on your table saw, then use hinges to open the lid. To make the 4 inch by 4 inch box, you need to start off with a board that is at least 26 inches long and 4 inches wide, by three-eighths of and inch thick.
In terms of tools, you will need a router and router table with a fence and you will also need a rabbeting bit that can be set for 3/8" (this is normally done by selecting the correct bearing on top) and you will need a spiral bit, you can use a 1/4" but will find that a 3/8" spiral bit is slightly more forgiving when it comes to cutting the top off the box. The 1/4" will work fine, just make sure you are absolutely correct with your cuts.
SEE MORE VIDEOS ON FINISHING THE ONE PIECE BOX - CLICK "READ MORE"
We often don't get the opportunity to see "behind the scenes" tours of businesses that we deal with on a regular basis, but today, we are making an exception. We have not only a behind the scenes look, but and actual guided tour of a bit and blade sharpening business called "The Edge". We get to see what the machinery looks like that sharpens our bits and blades and how it is use.
In this video you will get to see a variety of sharpening machinery and tools and in some cases we will get to see how they work and what they do. Our tour guide is sharpening expert and The Edge Owner, Tom Saxby, who has a remarkable sense of what it takes to provide sharp blades for specific needs at competitive prices. In this video we will get to see what a spiral sharpening machine looks like and how it work, we will see how blade sharpening machine for jointer planers works and including a variety of blade sharpening machinery.
h
There are two very fascinating machines that are particularly interesting. One is the CNC saw blade sharpener the other is a machine that actually makes shaper type blades.
Welcome to woodworkweb, the interactive resource for all woodworkers. We encourage visitors to Sign-Up and join our woodworking community. Members can participate in our woodworking forums, set-up their own profiles, add images, post videos, create a woodworking blog and get access to member only woodworking ebooks and woodworking plans.
Almost every woodwork has used stain to change the color or wood at one time or another, but few of them have ever used "wood dye" to color wood, in fact, few woodworkers have even heard of wood dye so now is the opportunity to see the differences and understand the pros and cons of each. With this information we can then go about choosing which products to select for any given project.
When we have no other criteria to judge things on, we always select the cheapest product. Well, most of us do. Isn't it always true that once we know some things to look for in the products and services we purchase, we are all willing to pay more if there are benefits to the more expensive product. This is always the case with the lowly paint brush. I have done it myself. There I stand in front of a rack of paint brushes, they all look pretty much the same to me sitting their in their packages and priced from $1.99 up to $24.99 ... so, what do I do, I purchase the cheapest one.
In the scheme of things, there are not many actual "tools" when it comes to finishing of wood projects. Sure there are paint brushes of various types and sizes and large selection of spray type tools and attachments but other than that, there is not a lot avalable. 
Finishing woodwork projects is the last step in a labor of love so it's critical that the finish show off the hard work, and the details of the wood . Add this to the fact that I have always tried to use products that are eco friendly and the list of finishing products starts to diminish signficantly. The only problem is that in many cases, the eco-friendly products I have tried have not given me anywhere near the kind of finish I wanted ... or expected ... until I discoverd OSMO.
Making boxes with the router is argueably one of the most fun things you can do with a router table. Not only that, you get to turn out objects that almost everybody loves and can use ... and it makes you look great. The other thing with boxes on the router table is by taking a design like this and modifying the sizes a little bit, you can make a whole range of different sizes, with or without hinged tops and all sorts of different and unique add-ons. Boxes are one of the most popular items for many people because they look great and are functional. They can be varied in so many different ways, different woods, contrasting woods, stains and dyes, final finishes, glossy, satin, matte, or by making them from laminated veneer woods and highlighting with contrasting wood, the variables are endless.
We often don't get the opportunity to see "behind the scenes" tours of businesses that we deal with on a regular basis, but today, we are making an exception. We have not only a behind the scenes look, but and actual guided tour of a bit and blade sharpening business called "The Edge". We get to see what the machinery looks like that sharpens our bits and blades and how it is use.